Find jobs suitable to you:

Azuko has national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

 

With above mentioned motto, we are looking for a faculty to teach Revit-MEP modeling, design, merging or all components on Naviswork. The candidate should be passionate about teaching and sharing the industrial knowledge. Below are the job description:

• Minimum 2 year of MEP and HVAC industry experience

• Prior experience to list given below:

  • AutoCAD

  • Revit MEP

  • Naviswork

• Domain knowledge of HVAC design is must.

• Expertise in Piping, Plumbing, and Fire safety is added advantage,

• We prefer full time engagement but for suitable candidates we are open for other options as well.

• Timing and salary is no restriction for right candidate​

​

If you feel you have high acumen to distinguish in industry then you may get a chance to work on our book publishing services of Azuko publishing (you can find out books on Amazon by simply searching for Azuko).

​

If you can teach as well as learn new things then we are more excited than you to work with you. Apply for this exciting journey of teaching, learning, working, and writing.

​

All the best!

Azuko Technical Institute

www.azukotech.com

Azuko has national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

 

With above mentioned motto, we are looking for a faculty to teach Revit-MEP modeling, design, merging or all components on Naviswork. The candidate should be passionate about teaching and sharing the industrial knowledge. Below are the job description:

• Minimum 2 year of Civil industry experience

• Prior experience to list given below:

  • AutoCAD

  • Revit MEP

• Domain knowledge of electrical design is must.

• We prefer full time engagement but for suitable candidates we are open for other options as well.

• Timing and salary is no restriction for right candidate​

 

If you feel you have high acumen to distinguish in industry then you may get a chance to work on our book publishing services of Azuko publishing (you can find out books on Amazon by simply searching for Azuko).

 

If you can teach as well as learn new things then we are more excited than you to work with you. Apply for this exciting journey of teaching, learning, working, and writing.

 

All the best!

Azuko Technical Institute

www.azukotech.com

Azuko has national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

 

With above mentioned motto, we are looking for a faculty to teach Electrical design and layout on MEP electrical. The candidate should be passionate about teaching and sharing the industrial knowledge. Below are the job description:

• Minimum 2 year of Electrical industry experience

• Prior experience to list given below:

• AutoCAD

• Revit MEP

• Domain knowledge of electrical design is must.

• We prefer full time engagement but for suitable candidates we are open for other options as well.

• Timing and salary is no restriction for right candidate

• Work location is Erandwane, Pune 411004.

 

If you feel you have high acumen to distinguish in industry then you may get a chance to work on our book publishing services of Azuko publishing (you can find out books on Amazon by simply searching for Azuko).

 

If you can teach as well as learn new things then we are more excited than you to work with you. Apply for this exciting journey of teaching, learning, working, and writing.

 

All the best!

Azuko Technical Institute

www.azukotech.com

Azuko has national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

 

With above mentioned motto, we are looking for a faculty to teach Electrical CAD, including manual electrical design and working on software. The candidate should be passionate about teaching and sharing the industrial knowledge. Below are the job description:

• Minimum 2 year of Electrical industry experience

• Prior experience to teach AutoCAD Electrical

• Domain knowledge of electrical design

• We prefer full time engagement but for suitable candidates we are open for other options as well.

• Timing and salary is no restriction for right candidate

 

If you feel you have high acumen to distinguish in industry then you may get a chance to work on our book publishing services of Azuko publishing (you can find out books on Amazon by simply searching for Azuko).

 

If you can teach as well as learn new things then we are more excited than you to work with you. Apply for this exciting journey of teaching, learning, working, and writing.

 

All the best!

Azuko Technical Institute

www.azukotech.com

Azuko has national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

 

With above mentioned motto, we are looking for a faculty to teach Electrical Routing and Wire harnessing on NX and CATIA. The candidate should be passionate about teaching and sharing the industrial knowledge. Below are the job description:

• Minimum 2 year of subject industrial experience

• Prior experience to teach Routing and Harnessing

• We prefer full time engagement but for suitable candidates we are open for other options as well.

• Timing and salary is no restriction for right candidate

• Work location is Erandwane, Pune 411004.

 

If you feel you have high acumen to distinguish in industry then you may get a chance to work on our book publishing services of Azuko publishing (you can find out books on Amazon by simply searching for Azuko).

If you can teach as well as learn new things then we are more excited than you to work with you. Apply for this exciting journey of teaching, learning, working, and writing.

 

All the best!

Azuko Technical Institute

www.azukotech.com

Azuko has national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

With above mentioned motto, we are looking for a faculty to teach Civil engineering courses. The candidate should be passionate about teaching and sharing the industrial knowledge.

 

Below are the job description:

• Minimum 1 year of education industry experience

• Prior experience to teach at least three courses from the list given below:

  • AutoCAD

  • Revit Architecture

  • Revit MEP

  • STAAD.Pro

  • ETABS

  • MSP

  • Primavera

• Domain knowledge of Road design, Bridge design, MEP services, etc. will be an added advantage

• We prefer full time engagement but for suitable candidates we are open for other options as well.

• Timing and salary is no restriction for the right candidate

 

If you feel you have high acumen to distinguish in industry then you may get a chance to work on our book publishing services of Azuko publishing (you can find out books on Amazon by simply searching for Azuko).

 

If you can teach as well as learn new things then we are more excited than you to work with you. Apply for this exciting journey of teaching, learning, working, and writing.

 

All the best!

Azuko Technical Institute

www.azukotech.com

Hello Freshers & Students!

 

Greeting from Azuko Technical Institute.

 

Azuko is an IIT Mumbai Alumnus institute with national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

We are looking for Students and Freshers to work with us for sales and marketing internship.

 

Below are the job requirement:

• Candidate should be engineering student (Degree or Diploma)

• You should have good networking skills with students.

• If you are a student leader or event coordinator at your college then it would be an added advantage.

• Primarily we are looking for Civil, Electrical, and Mechanical students but if you from other branches then you should be confident to perform marketing activities for these branches.

 

Below are the job descriptions:

• Candidate will get sales training from Azuko

• Candidate will perform sales activities to students to enroll for job oriented courses.

• Candidate will work remotely. They may come with enrolling candidates or even emote coordination is acceptable.

• Candidates will be given a monthly target to be achieved.

 

Below are the benefits:

• Experience letter: It will be considered as internship program. The candidates will get experience letter during or at the end of the program. It will help to get full time job.

• Sales commission: It will be commission based internship. The commission will be fixed percentage of sales and collection.

 

If you are looking to earn while you learn, or earn by remote working and also get an experience letter for same to remove fresher tag then apply for this position. We would be more than happy to work with you.

 

All the best!

Azuko Technical Institute

www.azukotech.com

Azuko has national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

 

With above mentioned motto, we are looking for an industrial faculty to provide Plastic domain training using CATIA. The candidate should be passionate about teaching and sharing the industrial knowledge. Below are the job description:

• Plastic Domain knowledge is must.

• Minimum 2 years of working in plastic domain on CATIA

• Ability to teach Sketcher, Modeling, Assembly, Drafting, Sheet metal and plastic orkbench of CATIA

• Should be able to provide industry level training

• Should be sharing real life industrial examples and giver exercises also on real life industrial projects.

 

If you can teach as well as learn new things then we are more excited than you to work with you. Apply for this exciting journey of teaching, learning and learning.

​

All the best!

Azuko Technical Institute

www.azukotech.com

Azuko has national and international industrial work exposure. It has presence in more than 12 countries. Azuko Technical Institute is educational service of Azuko group, dedicated to provide relevant and modern industrial education.

 

With above mentioned motto, we are looking for an industrial faculty to provide SHEET METAL domain training using CATIA/NX/CREO. The candidate should be passionate about teaching and sharing the industrial knowledge. Below are the job description:

• Sheet Metal Domain knowledge is must.

• Minimum 2 years of working in sheet metal domain on CATIA/NX/CREO

• Ability to teach Sketcher, Modeling, Assembly, Drafting, Sheet metal and Plastic workbench of CATIA/NX/CREO

• Should be able to provide industry level training

• Should be sharing real life industrial examples and giver exercises also on real life industrial projects.

 

If you can teach as well as learn new things then we are more excited than you to work with you. Apply for this exciting journey of teaching, learning and sharing.

 

All the best!

Azuko Technical Institute

www.azukotech.com